Answers are grounded in this paper and cite their sources.
Molybdenum disulfide (MoS2) is an attractive visible-light photocatalyst, but fast electron–hole recombination limits its performance. Here, undoped and Pd-doped MoS2 thin films (2, 4 and 6 wt.% nominal Pd) were deposited on quartz by sol–gel spray coating and sulfurized at 800 °C in a sulfur-rich atmosphere. X-ray diffraction confirmed hexagonal 2H-MoS2 in all films with dominant (002) texture, indicating lamellae parallel to the substrate. Pd incorporation contracted the c lattice parameter and strongly narrowed the (002) reflection: the Scherrer coherent domain size increased from 4.7 nm (undoped) to 62.3 nm at 4% Pd and decreased again to 16.9 nm at 6% Pd. Raman spectroscopy confirmed this trend, with E12g and A1g modes blue-shifting and narrowing from 15 to 5 cm-1 for 2–4% Pd, then broadening at 6% Pd. FTIR showed the Mo–S band near 600 cm-1 in every film with no Pd-related phase. The optical gap remained at 1.087 ± 0.076 eV (indirect) and 1.132 ± 0.005 eV (direct), consistent with multilayer MoS2, while absorption intensity increased with Pd. Under 20 W LED irradiation, all films outperformed photolysis (8.0% in 40 min). The 4% Pd film reached 88.1% methylene blue degradation with kap= 0.0483 min-1, 1.29 times the undoped film, while 6% Pd fell to 57.8%. Because the optical gap is invariant across the series, this gain is attributed to improved crystalline order and to Pd-mediated interfacial charge separation, both optimal at intermediate loading; a mechanism consistent with, but not independently verified by, the present data.
No takes yet. Share an insight, caveat, or question.
Lopes et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: