Answers are grounded in this paper and cite their sources.
This study investigates the droplet size distribution in a high-velocity gas–liquid flow generated by a pneumatic nozzle equipped with a multichannel, specially designed screw-type swirl insert. Such a nozzle produces a hollow-cone spray pattern with a wide spray angle and high atomization quality, which is particularly relevant for use in furnaces and heat-and- mass transfer units with limited active space. Local measurements of the droplet flow parameters were performed using the count-pulse method, which is based on recording electrical current pulses generated when droplets of a conductive liquid bridge the gap between electrodes. Using a single-parameter function describing the droplet size distribution, it is possible to determine the differential and integral volume distribution functions by droplet diameter, the modal, median, and conditionally maximum droplet diameters, as well as the specific liquid volume flux at various points within the spray. Experimental results demonstrate the dependence of the modal droplet diameter on the air velocity at the nozzle outlet and on the air-to-liquid flow rate ratio. It was established that for a given air exit velocity, a gradual decrease in the relative air flow rate reveals a threshold value at which the self-similar atomization zone transitions into a region where droplet size increases markedly. The findings enable control of the liquid atomization process by adjusting the air velocity at the nozzle outlet, i.e., by varying the pressure drop across the nozzle, thereby optimizing operating costs. The proposed methodology is suitable for both research and practical applications, and the results can be used in the design and improvement of atomizer configurations to ensure optimal spray regimes, enhance the energy efficiency of heat-and-mass transfer processes in thermal power equipment, and develop automation systems for their operation.
No takes yet. Share an insight, caveat, or question.
Pereselkov et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: