Answers are grounded in this paper and cite their sources.
This paper reports the first large-eddy simulation of chemically reacting flow in a turbine stage to analyze the influence of fuel injection and combustion on its aerodynamic and thermodynamic performance. Two reacting cases—with 4 and 16 fuel injectors at the inlet for each stator passage—are computed and compared against two nonreacting cases, one with four fuel injectors and the other without. The analyses indicate viability for the continuous-turbine-burner (CTB) concept, which offers the potential for a significant increase in the specific power/thrust of a gas-turbine engine without loss of efficiency. Fuel injection and combustion have minimal influence on the total-pressure loss. Compared with the baseline nonreacting case, the stage work per unit mass increases by 8.5% and 11.5% in the two reacting cases, while the residual work rises by 17.3% and 16.0%, respectively. The two reacting cases exhibit a 14.5% increase in overall work and a thermal efficiency of 44% for the fuel injection. Local high temperature on the rotor blade is suppressed by using a more uniform spanwise distribution of fuel injectors. The work extraction process of a CTB is analyzed from both thermodynamic and mechanical views.
No takes yet. Share an insight, caveat, or question.
Zhu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: