Answers are grounded in this paper and cite their sources.
Swelling in lithium-ion cells can translate into non-uniform deformation inside mechanically constrained multi-cell assemblies, but quantitative, spatially resolved characterization at the assembly scale remains limited. Here, we present an X-ray computed tomography (CT)-based workflow to quantify aging-induced geometric change and geometric inhomogeneity in an 8-cell prismatic lithium iron phosphate (LFP) module operated under mechanical constraint. The module was scanned at the beginning of life and in an aged state, corresponding to a module state of health of 86.58% based on discharge capacity, under matched conditions of 30% module-level state of charge and 25 °C. From the reconstructed CT volumes, spatial fields of cell thickness and inter-cell gaps were extracted using an edge-based image-processing workflow and summarized using statistical descriptors (mean, standard deviation, interquartile range). After cycling, all cells exhibited net thickening and all inter-cell gaps decreased, while the overall stack thickness changed only marginally, indicating that swelling was largely accommodated by compression of the inter-cell pads. The thickness-distribution descriptors further indicated tendencies toward increased within-cell heterogeneity and cell-to-cell dispersion. The cell-to-cell geometric differences were accompanied by greater electrochemical dispersion in the aged-state capacity determination test. The proposed workflow provides non-destructive, spatially resolved metrics for evaluating deformation accommodation in constrained battery stacks and for generating quantitative reference data for model validation and design assessment.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: