Answers are grounded in this paper and cite their sources.
The applicability of wall-boiling computational fluid dynamics models to fusion-relevant high-heat-flux cooling conditions remains uncertain. Under highly subcooled, high-velocity flow, classical Rensselaer Polytechnic Institute (RPI) type formulations have been shown to produce non-physical thermal behaviour. In the present work, a wall-flux-partitioning model developed by Massachusetts Institute of Technology (MIT) is implemented (including the modifications) within the ANSYS Fluent two-fluid framework and assessed against smooth-bore High heAt loaD tESt (HADES) experiments conducted at CEA-IRFM (Institut de recherche sur la fusion magnétique, CEA, Cadarache, France), under fusion-relevant conditions. The model is compared directly with both the classical RPI formulation and a conservative single-phase simulation, which does not consider heat transfer increase due to nucleate boiling.The MIT model, based on a bubble sliding-conduction mechanism, provides significantly improved agreement with the measured thermocouple temperatures compared with the classical RPI formulation. To the authors’ knowledge, this work represents the first independent implementation and assessment of this MIT wall-boiling model outside its original development. It is evaluated under fusion-divertor-relevant cooling conditions. Such simulations remain rare because they combine high heat flux, high liquid velocity, strong subcooling, and numerically stiff near-wall phase-change behaviour. Beyond the direct comparison with HADES experimental data, the present work also analyses model-relevant quantities, including local wall-temperature redistribution, wall heat-flux redistribution, heat-flux partitioning, and the response of the underlying boiling parameters. The results show that the implemented model behaves physically consistently and captures the main measured thermal trends substantially better than the classical RPI formulation.A sensitivity study of the main wall-boiling parameters and selected bulk-flow two-phase parameters shows that, under fusion-relevant conditions, the predicted thermal response of the MIT model is governed by several coupled closure relations. The bubble departure diameter andbubble departure freqency are highly influential, but nucleation site density, wait time, and sliding-area modelling also affect the solution. The selected bulk two-phase parameters have an insignificant direct thermal influence, but still affect numerical robustness. These results suggest that future development of fusion condition relevant boiling models should primarily target improved bubble departure diameter and bubble departure frequency closures.
No takes yet. Share an insight, caveat, or question.
Gajšek et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: