Answers are grounded in this paper and cite their sources.
Smart water metering requires low-power, large-scale communication that existing LPWAN solutions do not fully address: the single-hop topology of LoRaWAN needs dense gateway deployments in urban environments, and cellular alternatives incur subscription costs and higher energy consumption. This paper presents a multi-hop LoRa protocol for smart water metering that exploits the static topology and uplink-dominated traffic of this application to simplify the protocol design. Each node selects its relay through a lightweight message exchange and a cost function that weights hop count, relay load and link quality, using only local information, so that the network forms a tree rooted at the gateway. Overhearing the relay retransmission replaces dedicated acknowledgement packets on the relayed hops. The cost function coefficients were tuned by Bayesian optimization for networks of up to 100 nodes; the best configuration depends on network size, and the link-quality weight proved negligible. On topologies not used for tuning, with node density increasing over a fixed area, the mean peak relay load settles at 13.6 to 15.2 clients for 40 to 100 nodes, a reduction of up to 67% relative to a shortest-hop (BFS) baseline, for an average hop-count increase of up to 13.5%. The transmit energy of the busiest relay falls by up to 69%, although its daily consumption remains dominated by reception. The evaluation covers the topology produced by relay selection and the resulting analytical energy budget.
No takes yet. Share an insight, caveat, or question.
Bexiga et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: