Answers are grounded in this paper and cite their sources.
To overcome the intrinsic limitations of olivine-type LiMn0.5Fe0.5PO4 (LMFP55) cathode materials, including poor electronic conductivity, sluggish Li+ diffusion kinetics, and Mn dissolution during cycling, a stepwise modification strategy combining Ti-Mg co-doping and multi-walled carbon nanotube (MWCNT) incorporation was developed to improve the electrochemical performance of LMFP cathodes. The Ti-Mg co-doping strategy regulates the local crystal structure and improves structural stability of the material, while the introduction of MWCNTs constructs an interconnected conductive network that facilitates electron transport and enhances interfacial stability. Among the investigated samples, the composite with nominal Ti and Mg stoichiometric coefficients of 0.03 and 0.02, respectively, and an MWCNT loading of 4 wt% exhibits the best overall electrochemical performance. It delivers an initial discharge capacity of 156.87 mAh g-1 and an initial coulombic efficiency of 94.81% at 0.1C. Furthermore, the optimized electrode exhibits a capacity decay of only 13.23% after 200 cycles and maintains a capacity retention of 74.87% after 500 cycles at 2C. The enhanced electrochemical kinetics are further confirmed by the reduced charge-transfer resistance (27.86 Ω) and increased Li+ diffusion coefficient (7.90 × 10-13 cm2 s-1). These improvements are attributed to the synergistic regulation of the crystal structure and conductive framework achieved through Ti-Mg co-doping and MWCNT incorporation. This study provides insights into the structural optimization of LMFP cathode materials and offers a promising approach for developing high-performance lithium-ion batteries.
No takes yet. Share an insight, caveat, or question.
He et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: