Answers are grounded in this paper and cite their sources.
Capacitive pressure sensors commonly exploit surface roughness to increase contact area and enhance sensitivity; however, the role of electrode roughness after intimate electrode-dielectric contact is established remains poorly understood. Here, a two-dimensional multiphysics finite-element framework has been developed integrating solid mechanics, electrostatics, and ionic transport to elucidate the influence of electrode surface morphology in an interdigital ionic capacitive pressure sensor under intimate contact. The simulations reveal a two-stage mechanical response with a transition near 30 kPa, corresponding to the ionic hydrogel dielectric reaching the electrode-top plane, and show that macroscopic deformation is largely insensitive to electrode roughness. Additional mechanical sweeps refine the reference transition to 28 kPa and show its dependence on electrode thickness, hydrogel modulus, and substrate support. In contrast, roughness strongly modulates the interfacial electric field and ion redistribution. Increasing roughness intensifies the absolute local electric field but suppresses its pressure-induced variation through a curvature effect, thereby reducing the electrochemical driving force for ion redistribution. Mean-field and local curvature analyses support this interpretation. A near-smooth interface (A = 0.01W) achieves the highest predicted sensitivity of 10.832 MPa-1 at 0-30 kPa, whereas a smooth interface (A = 0W) provides the highest predicted sensitivity of 2.820 MPa-1 at 30-170 kPa. These findings suggest interfacial field modulation, rather than contact-area expansion, as a critical design parameter for ionic capacitive sensors operating under the modeled intimate contact conditions.
No takes yet. Share an insight, caveat, or question.
Zeng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: