Answers are grounded in this paper and cite their sources.
This study investigates the effect of heat treatment on cast Co–28Cr–6Mo biomedical alloy used for the production of knee implants. The alloy is widely used due to its excellent corrosion resistance, wear resistance, and mechanical properties. However, these properties can be further optimized by appropriate heat treatment. The thermal stability of the alloy was evaluated through hardness meas-urements and microstructural characterization. The highest hardness was achieved after annealing at 800 C, which was associated with an increased fraction of the ε-phase with HCP crystal structure. In contrast, solution annealing followed by aging resulted in a microstructure dominated by the γ-phase with FCC structure and the precipitation of fine M23C6 carbides. Although both heat-treatment routes increased hardness by approximately 30 % compared to the as-cast condition, they operated through different strengthening mechanisms. The results indicate that the solution-treated and aged condition may provide a favorable combination of strength and ductility, making it a promising option for orthopedic implant applications.
No takes yet. Share an insight, caveat, or question.
Thürlová et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: