Answers are grounded in this paper and cite their sources.
NiTi triply periodic minimal surface (TPMS) metamaterials combine tailorable mechanical behavior, superelasticity, and interconnected fluid-transport pathways, yet the coupled effects of topology and continuous gradation on above properties remain unclear. Here, uniform and graded Gyroid and Diamond NiTi TPMS metamaterials were fabricated by additive manufacturing, and their formability, microstructure, compressive response, cyclic superelasticity at 36 °C, and Darcy permeability were investigated experimentally and numerically. All structures retained continuous load-bearing networks and interconnected pores, with internal defect fractions below 0.021 %. Topology-dependent heat-transfer pathways produced distinct grain morphologies, grain-boundary characteristics, textures, and lattice distortions, while gradation generated microstructural heterogeneity. Loading parallel to the gradient intensified stress and martensitic-transformation localization, yielding stress concentration factors of 5.03 and 11.57 for graded Gyroid and Diamond NiTi, respectively. Normal loading reduced these factors to 2.68 and 1.89, enabling graded Diamond to reach an elastic modulus of 1090 MPa, fracture strain of 22.9 %, and fracture strength of 203.8 MPa. Uniform Gyroid showed the best cyclic stability, retaining ∼ 0.42 % residual strain after 20 cycles. Gradation increased Darcy permeability to 8.54 × 10 -8 and 9.14 × 10 -8 m 2 , 3.7 and 30-fold above uniform counterparts. These findings support the integrated design of mechanical, superelastic, and transport properties in additively manufactured NiTi TPMS metamaterials.
No takes yet. Share an insight, caveat, or question.
Lu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: