Answers are grounded in this paper and cite their sources.
A fabrication strategy for p + -i- p + type organic thin-film transistors (OTFTs) with various contact configurations has been presented. The p + -i- p + type transistors feature highly doped ( p + ) layers as the source and drain (S-D) regions and an undoped intrinsic (i) layer as the active layer, both of which are composed of the same hole-transporting material. In this study, poly(2,5-bis(3-tetradecylthiophen-2-yl)thieno(3,2-b)thiophene) (PBTTT) was employed as the host material, and p + -i- p + type OTFTs with both bottom-gate/bottom-contact (BGBC) and bottom-gate/top-contact (BGTC) configurations were fabricated onto CYTOP-coated SiO 2 gate insulators via transfer printing using elastomer stamps. The S-D p + layers were prepared by immersion doping with 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) as well as anion-exchange doping. A new doping process combining anion-exchange doping with stamp-assisted transfer allows fabrication of BGTC p + -i- p + type OTFTs, which are difficult to realize using conventional methods. The resulting BGTC transistors exhibited enhanced low-field mobility in the channel and reduced contact resistance compared to the BGBC p + -i- p + type devices. This improvement occurs because the active semiconductor layer (i layer) for BGTC devices can be thermally annealed to improve its crystallinity, whereas the i layer in BGBC OTFTs cannot be annealed because of the deterioration risk of the pre-deposited p + layers. This study suggests a novel and versatile approach to device fabrication based on organic multilayers using cost-effective, solution-based processes.
No takes yet. Share an insight, caveat, or question.
Nakajima et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: