Answers are grounded in this paper and cite their sources.
In this work, the mechanism of single-event burnout (SEB) in p-GaN gate HEMTs is thoroughly investigated by irradiation experiments and simulations. The samples were irradiated with tantalum (Ta) ions (67 MeV cm2/mg in GaN). There are two distinct failure modes observed in samples occurring in SEB. One is the four-terminal short-circuit mode, and the other is the vertical short-circuit mode between the drain and the substrate. By comparing damaged structures, it can be inferred that both failure modes probably originated from the burnout of the drain. According to the transient currents and temperature distributions by simulations, it is found that the most sensitive region to SEB is the edge of the drain, rather than the edge of the gate or field plate. The SEB mechanism can be explained as follows. A large number of generated holes accumulate at the GaN/AlN interface, while a large number of electrons will accumulate at the Si-Sub/AlN interface, leading to a high electric field in the AlN layer and in turn enhancing the impact ionization. Then the generated electrons will drift to the drain and concentrate around the drain, which produces high current density as well as a high electric field near the drain. Therefore, the lattice temperature there is quickly raised to trigger thermal runaway at the drain.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: