Answers are grounded in this paper and cite their sources.
A significant portion of the distresses observed in asphalt concrete (AC) mixtures are attributed to the performance of the fine aggregate fraction coated with asphalt binder. The primary objective of this study is to propose a methodology for evaluating the Fine Aggregate Matrix (FAM), incorporating the entire fine fraction of AC. Initially, the Marshall test was conducted to determine the optimum asphalt content (OAC) for the AC mixture and to calculate the corresponding asphalt content for the FAM. Two types of FAM specimens were fabricated to assess their resistance under monotonic compressive and tensile loading at temperatures of 5, 20, and 40 °C, using loading rates of 0.5, 1.0, 3.0, and 5.0 mm/min. These results were compared with compressive and tensile strength tests conducted on two types of AC specimens under the same temperatures as the FAM, but with loading rates of 5, 10, 30, and 50 mm/min, corresponding to an AC/FAM loading rate ratio of 10. For each test, the following parameters were determined: Peak Load, Strength, Load Line Displacement, Stiffness, and Work of fracture (Wf). Additionally, the stiffness of the FAM was measured and correlated with the resilient modulus (RM) of the AC, using the same temperatures and loading frequencies of 2.5, 5.0, 15, and 25 Hz. The results reveal strong statistical correlations between FAM and AC responses. Based on these findings, a simple methodology is proposed for the preparation and evaluation of FAM, which incorporates the entire fine fraction and can be adapted to any laboratory setting.
No takes yet. Share an insight, caveat, or question.
Bastidas-Martínez et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: