Answers are grounded in this paper and cite their sources.
Dispersive interrogation converts Fabry–Perot spectra into temporal waveforms, but cavity-length estimates depend on both the propagation approximation and the calibration of the time–wavelength coordinate. We formulate a coherent two-beam forward model retaining relative delay, reflection phase, second- and third-order dispersion, and detector bandwidth. Variable projection removes pulse-dependent gain and offset, yielding a local expression that relates waveform mismatch to length bias and propagates correlated calibration uncertainties. An information analysis quantifies the contribution of an independent phase observation. In a controlled 50 μm cavity simulation at a signal-to-noise ratio of 60 dB, 200 trials give root-mean-square length errors of 7.980, 0.0279 and 0.0060 nm for linear intensity mapping, nonlinear intensity mapping and field-template estimation, respectively, with calibration parameters fixed at their true values. The corresponding local standard-deviation bound increases from 0.0060 to 2.548 nm when reflection phase is unknown. Separate measurements test coordinate calibration against an optical spectrum analyser. For an unloaded stainless-steel specimen, a dispersion-constrained local linear mapping reduces the normalized spectral residual from 7.44% to 3.93% and the validation-peak wavelength discrepancy from 0.317 to 0.053 nm. For a sapphire specimen, physical nonlinear mapping reduces spectral residuals from 6.32–6.63% to 4.94–5.18% in two static validation windows; empirical quadratic calibration gives 4.67–4.94%. The results separate errors due to reference-wavelength scaling, mapping curvature and finite-dispersion propagation, and quantify the phase calibration needed to benefit from a coherent estimator.
No takes yet. Share an insight, caveat, or question.
Zheng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: