Answers are grounded in this paper and cite their sources.
Fiber-reinforced polymer (FRP) composites do not corrode, so engineers use them where steel fails. Their weak point is long-term behavior in hot, wet, alkaline and salty settings. This review covers 100 studies from 1998 to 2026 and five design documents on FRP bars, laminates and bonded systems. We grade the evidence and separate measured results from model predictions. Moisture, alkali, heat, ultraviolet light, freeze–thaw cycles and sustained stress damage the resin, the fiber–matrix interface and, in glass and basalt FRP, the fibers. Retention values cannot rank materials unless product, exposure and test method match. In one study with identical conditions, glass FRP bars kept 43.1% and carbon FRP bars 84.9% of their tensile strength after 180 days at 60 °C in pore solution. Other glass FRP values of 43–58% come from different products, solutions, stress levels and durations. In bonded systems, the adhesive and the substrate often control the losses. Arrhenius extrapolation holds only if one mechanism acts across the test temperatures. The activation energies in the one glass FRP bar study we could verify in full are low (19–27 kJ/mol), so a 180-day test at 60 °C covers about 1.3 years at 30 °C. Machine learning (ML) models report R2 up to 0.98, but the datasets are small, the validation differs and the results do not compare across tasks. The physics-informed ML workflow we propose is a concept that no study has validated. ACI CODE-440.11-22 sets the environmental reduction factor (CE) for glass FRP bars at 0.85, and none of the documents we reviewed sets CE as an explicit function of service temperature. We list research needs for hot-arid and coastal climates.
No takes yet. Share an insight, caveat, or question.
Arifuzzaman et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: