Answers are grounded in this paper and cite their sources.
Purpose Under biaxial loading conditions, fatigue crack propagation can be very hard to predict, due to different possible propagation modes and the high number of parameters to consider. If mixed mode or out-of-phase conditions are present, crack deflection leads to many possible propagation paths and different failure locations. Therefore, predicting crack behaviour and fatigue life becomes essential if safer part design is to be achieved. This article aims to map crack propagation under different biaxial loading conditions, providing a database of paths and stress intensity factors that can be used as a reference for future part design. Design/methodology/approach To achieve this goal, an idealized reference model was created, where specimen-specific effects on crack propagation can be neglected. When subjected to different stress ratios, biaxial ratios and load phase-shifts, crack propagation was simulated using a previously developed finite element method algorithm. Findings Using randomized loading parameters, a large database was built considering two possible propagation modes. In the end, a machine learning model was used to interpolate the database, providing the full map of possible crack paths, displaying an accurate correlation against the finite element simulations. Originality/value The developed quasi-analytical model provides, for the first time, an extensive map for crack paths and crack driving forces under different biaxial conditions, while the developed machine learning solutions enable the full interpolation of the calculated map. These results enhance fatigue design and unlock optimal specimen development. Highlights:
No takes yet. Share an insight, caveat, or question.
Moita et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: