Answers are grounded in this paper and cite their sources.
This article presents an integrated Reynolds-averaged Navier–Stokes simulation framework that simultaneously resolves the external aerodynamics of the NASA Common Research Model and the internal flow through an operating NASA Rotor 67 installed in the aircraft nacelle. The rotating fan is represented explicitly using the frozen rotor approach, thereby coupling the engine and airframe through the computed flowfield without prescription of additional rotor inlet or exhaust boundary conditions. The powered configuration is compared with an uncalibrated, unmodified flow-through nacelle configuration representative of a conventional aerodynamic baseline. Because their mass flow capture ratios are not matched, the comparison does not isolate rotor work at fixed mass flow but instead evaluates the combined aerodynamic differences between the two modeling approaches. The powered configuration captures a lower nacelle mass flow and consequently produces greater spillage around the nacelle lip. The resulting change in spillage alters the wing pressure field and shock locations and, in the model with a rotor but without a stator, interacts with the swirling exhaust plume. Although the resulting force differences are modest and are not intended as quantitative aircraft-performance predictions, the simulations demonstrate the computational feasibility of resolving coupled engine–airframe flow mechanisms on moderate computational resources.
No takes yet. Share an insight, caveat, or question.
Mueller et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: