Answers are grounded in this paper and cite their sources.
The development of remote work and home office arrangements has increased the need to adapt interior spaces for work activities. At the same time, post-consumer multilayer packaging presents recycling challenges due to its material composition. This study aimed to develop a preliminary interior partition panel using recycled Tetra Pak packaging, applying ecodesign principles and a circular economy approach. The proposal consisted of a composite structure with two outer layers of recycled cardboard and a core made of stucco mixed with shredded post-consumer Tetra Pak. Five experimental formulations were prepared, each containing 90 g of stucco and different amounts of shredded Tetra Pak: 0, 5, 10, 15, and 20 g. The mixtures were observed during preparation and evaluated preliminarily according to their workability, cohesion, integrity, and behavior during demolding. The observations showed that increasing the amount of recycled packaging made the mixtures more fibrous and voluminous and increased their water requirements. The formulation containing 90 g of stucco and 5 g of Tetra Pak showed the most favorable relative performance during demolding, retaining greater integrity than the other formulations. However, this sample still exhibited flexibility and fragility. The formulation without Tetra Pak fractured during demolding, while the mixtures with higher packaging contents showed reduced apparent cohesion. In addition, some of the samples retained moisture during evaluation, limiting direct comparisons between formulations. These findings indicate that shredded Tetra Pak can be incorporated into a stucco matrix, but the proportions of the materials and the amount of water require further optimization. The formulation containing 5 g of Tetra Pak is therefore considered a starting point for subsequent experimentation rather than a definitive material solution. Further controlled tests are necessary to evaluate the panel's properties before determining its suitability for interior partition applications.
No takes yet. Share an insight, caveat, or question.
Martínez et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: