Answers are grounded in this paper and cite their sources.
Microgels have gradually become a research hotspot in the field of aqueous lubricants owing to their ability to form a stable soft boundary film at friction interfaces and their environmentally friendly characteristics; however, their application in synthetic lubricating oils remains scarce. Therefore, in this study, P(NIPAAM-co-NVP) microgels were prepared and employed as lubricant additives in polyethylene glycol (PEG). Experimental results showed that the prepared P(NIPAAM-co-NVP) microgels exhibited good static storage stability in PEG200, with no macroscopic precipitation observed after 30 days. Tribological tests indicated that the microgels effectively improved the antiwear performance of PEG200, with the average friction coefficient and wear scar diameter reduced by 16% and 52%, respectively, compared with the base oil. The lubrication system also maintained stable tribological performance under various loads and rotational speeds. Based on SEM, EDS, and XPS analyses, the improvement in lubrication performance is proposed to originate from an interfacial protective layer jointly formed by microgel-related components and PEG200. The N 1s signal confirmed the presence of microgel-related components at the friction interface, and the formation of FeO and Fe2O3 indicated that tribochemical reactions occurred. These results provide a laboratory-scale proof of concept for P(NIPAAM-co-NVP) microgels as PEG200 additives.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: