Answers are grounded in this paper and cite their sources.
Effective water management remains a major limitation to high-power-density proton exchange membrane fuel cells (PEMFCs), where excessive liquid-water accumulation restricts oxygen transport and intensifies concentration losses. This study investigates a spatially engineered hydrophilic–hydrophobic flow-field strategy for passive water management, with particular emphasis on the orientation of surface wettability relative to reactant flow. Four configurations are evaluated using a three-dimensional, non-isothermal, two-phase electrochemical model: uniform wettability, hydrophilic-to-hydrophobic (Phil → Phob), hydrophobic-to-hydrophilic (Phob → Phil), and alternating wettability. The Phob → Phil configuration exhibits the best overall performance, increasing peak power density from 1.78 to 2.21 W cm -2 , corresponding to a 24.2% improvement over the reference case. Under high-load conditions, it reduces flooded cathode area from 31% to 15%, oxygen depletion from 34% to 18%, and mass-transport losses from 205 to 108 mV. Temperature non-uniformity and total exergy destruction are further reduced by approximately 42.9% and 28.4%, respectively. Moreover, 89.8% of the active area operates within ±10% of the mean current density, demonstrating substantially improved electrochemical uniformity. Capillary-pressure analysis reveals that performance is governed not simply by wettability contrast, but critically by its spatial direction along the flow path. These findings establish directional hydrophilic–hydrophobic engineering as an effective passive approach for coordinating water removal, oxygen accessibility, and membrane hydration while extending stable high-power-density PEMFC operation.
No takes yet. Share an insight, caveat, or question.
Alrwashdeh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: