Answers are grounded in this paper and cite their sources.
Severe thermal regeneration can create internal cracks in wall-flow particulate filters, which allow particles to bypass the porous walls. This study presents a numerical investigation of the time-dependent three-dimensional gas–particle flow in filter channels with an internal crack near the entrance, at an intermediate position, or near the exit. The channel Reynolds numbers examined range from 204 to 1632. The flow is governed by the Navier–Stokes equations in the clear-fluid regions and a Brinkman–Forchheimer formulation in the porous walls and plugs. Trajectories of nanoparticles with a diameter of 200 nm are calculated using Lagrangian tracking with slip-corrected drag and Brownian forces, and deposition is determined from particle–wall intersections. The results show that the crack provides a direct passage between neighboring inlet and outlet channels, producing an intense three-dimensional cross-flow with local separation and recirculation. The fraction of inlet flow passing through the opening reduces as the Reynolds number increases, and it increases as the crack moves toward the exit. The associated changes in the through-wall flow determine the spatial distribution of deposited particles, with enhanced deposition downstream of the crack and attenuated deposition upstream of it at higher values of the Reynolds number. For all crack positions, the filtration efficiency is increased with an increasing Reynolds number, but it is decreased as the crack moves towards the exit. Over the conditions examined, the efficiency rises from approximately 45–53% at a Reynolds number of 204 to 74–89% at 1632, depending on the crack position.
No takes yet. Share an insight, caveat, or question.
Dritselis et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: