Answers are grounded in this paper and cite their sources.
Hard thin films such as TiN and AlN serve as diffusion barriers, electrodes, and protective layers in microelectronic and power devices. In service, these films carry thermal, mechanical, and electrical loads at the same time, and their residual stress keeps changing under that combination. This study links stress evolution to electrical drift through a coupled thermo-mechanical-electrical constitutive model. The model includes Joule heating, viscoplastic creep, and stress-assisted atomic migration, and it is implemented on the open-source FEniCS and Elmer FEM platforms. Six groups of sputtered TiN and AlN films with controlled initial stress were prepared, and 108 dies were aged under six multi-field conditions. Under thermal cycling, stress passed through three stages: fast relaxation, slow accumulation, and saturation. The simulations matched measured mean stress within 6% and located edge stress peaks of 3.66 GPa. In TiN, sheet resistance increased linearly with retained compression at 2.05% GPa−1 (R2 = 0.94)—a trend that was reproduced only when atomic migration was included. In AlN, leakage current rose sharply once net tension exceeded +0.15 GPa. A stress-evolution-based stability index ranked the samples and identified preferred process windows; the best TiN group reached an extrapolated lifetime of 98,900 h, with a 95% confidence interval of 78,800 to 135,400 h, and its first rank survived all thirteen weighting scenarios that were tested. Code and raw data are provided in the related files of this submission (Data_and_Code_Zhiqing_Gu_2026-11.zip).
No takes yet. Share an insight, caveat, or question.
Gu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: