Answers are grounded in this paper and cite their sources.
Traditional square pre-folded energy-absorbing components are prone to port retraction, local instability and abrupt load-valley drops during dynamic crushing. To address this problem, a double-layer multi-cell reinforced energy-absorbing component was proposed by combining end constraint rings, a reverse pre-folded embedded tube and radial ribs. Physical compression tests on the baseline component, ABAQUS/Explicit simulations, parametric analysis and bounded candidate screening were used to examine crushing deformation, strain redistribution and energy absorption performance. The experiment-simulation comparison showed that the errors in the initial peak load, first valley load, mean crushing force and energy absorption over the validation interval were 0.43%, 11.12%, 1.69% and 1.52%, respectively. This agreement indicates that the finite element model captured the nonlinear crushing response of the pre-folded component and can be used for mechanism-oriented comparative analysis. The added cooperative constraint system changed the port shrinkage and side-wall local instability paths, enabling load-valley compensation and plastic strain redistribution. Within an effective crushing stroke of 125 mm, the FE-predicted Component V showed relatively high load-carrying and energy-absorption capacity, with Fmax of approximately 2475 kN, Fmean of approximately 1960 kN, Δ of approximately 1.26 and Ei of approximately 245 kJ. For a model mass of 5.36 kg, its SEA was approximately 45.7 kJ·kg−1. Compared with Component I, Component V increased Ei and SEA by approximately 56.2% and 43.0%, respectively, while markedly reducing Cv and η. Compared with Component IV, Component V provided higher energy absorption and lower full-curve fluctuation indices, whereas Component IV had a lower peak-to-mean force ratio. Component V is therefore interpreted as a high-energy-absorption candidate design within the investigated structural scope, while Component IV is more appropriate for conditions emphasising peak-load control.
No takes yet. Share an insight, caveat, or question.
An et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: