Answers are grounded in this paper and cite their sources.
In a fixed bed of reacting solid cooled by a heat transfer fluid, the reaction travels along the bed as a wave of constant pattern whose width sets the share of the reaction heat recovered at constant power. This width is known when heat transfer limits the reaction; no law is available when the gaseous reactant must also cross the converted solid. We studied this case in a closed reactor where a finned SrBr₂ composite reacts with pure water vapour at 1 to 10 kPa. In the frame of the wave, one resolved two-dimensional cross-section reproduces transient simulations of finite reactors within 0.5 %. The time the wave takes to pass a cross-section follows from two times computed without fitting: a thermal duration and the Stefan time of the hydration front over the vapour path. A power mean of these two times, of order 1.76, describes about 200 computations within 8.5 % (two extreme points excepted) over three fluid-side coefficients, heat paths of 1.5 to 5 mm and three decades of permeability. The ratio of the two times sets the regime: vapour widens the wave by less than 10 % when the Stefan time is below 0.38 times the thermal duration, so the admissible vapour path grows only as the square root of the heat path. Adjoint sensitivities of the width to eleven parameters test the law independently. The law becomes an upper bound when the dry solid is more than ten times as permeable as the hydrated solid.
No takes yet. Share an insight, caveat, or question.
Kuznik et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: