Answers are grounded in this paper and cite their sources.
Flexible and printed pressure sensors are key components for wearable electronics, biomechanical monitoring, and healthcare technologies. Here, we report fully printed and flexible pressure sensors based on interdigitated silver electrodes and poly(3,4‐ethylenedioxythiophene) (styrenesulfonate) (PEDOT) printed on polyethylene terephthalate (PET) substrates. The devices operate through pressure‐induced contact modulation enabled by a compressible spacer layer, allowing the trigger pressure and sensing characteristics to be adjusted through the sensor geometry. The printed sensors exhibited a sensitivity of 3.5 μA kPa −1 in the low‐pressure regime and showed preliminary repeatability over ten loading–unloading cycles. The sensors were integrated into a thin flexible array and combined with a wireless acquisition system for preliminary multi‐channel signal acquisition and real‐time visualization during violin performances. The five sensing elements were positioned at the finger‐contact locations on the violin bow, demonstrating the feasibility of integrating fully printed pressure sensors with portable wireless electronics. These results highlight the potential of printed flexible pressure sensor arrays for applications in distributed biomechanical monitoring, rehabilitation, and human–machine interfaces.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: