Answers are grounded in this paper and cite their sources.
The continuous discharge of wastewater containing synthetic dyes presents serious environmental and health challenges due to its toxicity, chemical stability, and difficulty in degradation. This calls for concern and therefore, necessitating the development of a sustainable and efficient biosorbent. This study prepared a sustainable nanoadsorbent from snail shell wastes impregnated with aluminum chloride to produce a biomass-alumina (Al 2 O 3 –CaO) nanosorbent for removing methylene blue (MB) and thymol blue (TB) from wastewater. The prepared material was characterized using FTIR, XRD, SEM, EDX, and pH pzc analysis, followed by batch adsorption studies. The adsorption data were fitted to the Freundlich, Sips, and Temkin isotherms and to pseudo-first- and second-order kinetic models. The FTIR analysis shows Me–O stretches at 550 and 838 cm −1 . XRD confirmed its crystalline structure with an average particle size of 24.73 ± 2.90 nm. SEM micrographs showed uniformly dispersed spherical nanostructures, while EDX analysis confirmed the presence of Al, Ca, and O, confirming composite formation, with a pH pzc value of 6.35. The adsorption equilibrium data were best fitted by the Freundlich model, with R 2 values of 0.98 and 0.94 for MB and TB, with corresponding K F values of 366.46 and 208.84 mg/g, respectively. The kinetic results followed the pseudo-first-order model. Thermodynamic analysis recorded positive ΔS° value and ΔG° < 0, for both dyes, while ΔH° = + 68.24 and − 2.98 kJ mol⁻ 1 for MB and TB, respectively. Al 2 O 3 -CaO showed remarkable stability and reusability during four consecutive adsorption–desorption cycles. This study shows the nanosorbent as a probable material for the remediation dye-laden wastewater.
No takes yet. Share an insight, caveat, or question.
Bamisaye et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: