Answers are grounded in this paper and cite their sources.
Characterization of laser-induced damage resistance for silica sol-gel antireflection coatings was performed using in situ damage testing. By comparing optical micrographs before and after laser-induced damage, it was found that most precursors leading to damage are visible under optical microscopy, likely originating from various defects on the coating surface. Detailed optical characterization identified four typical surface defect types on these coatings. Further characterization of these typical surface defects was performed, determining the causes of their formation, and laser-induced damage induced by dust particles was found to be dominant. To investigate particle-induced damage, silica particles (average size: 10 μm) were deposited on silica sol-gel coatings for in situ laser-induced damage testing. The experimental results further confirmed that damage precursors visible under optical microscopy during damage testing of the coatings were dust particles. Finite-difference time-domain simulations indicated micron-sized particles induce significant light field enhancement, potentially explaining particle-induced coating damage under high-fluence laser irradiation. Silica sols synthesized using reagents of different purities were employed to prepare coatings. Single-factor experiments showed that ultra-pure reagents reduced damage density by more than 70% compared with analytical-grade reagents.
No takes yet. Share an insight, caveat, or question.
Yan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: