Answers are grounded in this paper and cite their sources.
This work investigates the severe pitting corrosion of a neck flange in the top side of an offshore platform. The chemical analysis revealed that the material is a stainless steel grade UNS S32750. The material suffered an incorrect heat treatment which resulted in a microstructure containing about 12.5% of deleterious phases ( σ and χ ) and only 3.9% of ferrite. The rapid deterioration of the external surface by pitting motivated the failure analysis and, fortunately, the flange didn’t present brittle fracture in service. The unproper microstructure was characterized by non-destructive (ferritoscope, hardness) and desctructive techniques (XRD, electrochemical anodic polarization, scanning electron microscopy). The corrosion properties could be regenerated by solution treatment at 1100 °C followed by water quenching. Instead, the flange was incorrectly treated at lower soaking temperature and/or slow cooling.
No takes yet. Share an insight, caveat, or question.
Antunez et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: