Answers are grounded in this paper and cite their sources.
Deterministic placement of fragile microcomponents is a central challenge in advanced electronic manufacturing, including chiplet integration and micro-LED assembly. Most switchable adhesives rely on contact-mediated detachment, which concentrates stress at the perimeter and causes slip and misalignment. Here, we report a diving beetle-inspired electroactive switchable adhesive (DESA) that achieves deterministic transfer through vibration-driven noncontact release enabled by interfacial stress reconfiguration. A perforated electrode couples a bioinspired adhesive layer to an electroactive PVC gel actuator, defining electrically contracting electrode-contact regions and mechanically linked gel-continuous hole regions. Under actuation, differential displacement between these regions deforms the adhesive layer and promotes partial peel-off at distributed interior sites rather than along a single perimeter front. At the 269 Hz resonance, vibration amplifies the displacement mismatch and spreads peel-off across the contact area, progressively reducing the load-bearing area. The resulting inertial stress completes noncontact separation, suppressing misalignment. The adhesive layer provides > 20 kPa dry and > 42 kPa wet adhesion across diverse substrates and retains stable performance over 1000 attachment-detachment cycles. On a robotic platform, the device transfers microcomponents with a lateral placement error of 318 ± 155 µm (≈99.5% placement accuracy). This interfacial stress reconfiguration offers a route to deterministic placement beyond adhesion-strength control.
No takes yet. Share an insight, caveat, or question.
Hwang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: