Answers are grounded in this paper and cite their sources.
Cement deep mixing (CDM)-improved ground is often modeled using uniform properties, although its stiffness varies spatially. This study examines how this variability affects wall displacement in a soft-ground excavation in Ho Chi Minh City, Vietnam. The excavation was supported by a CDM retaining wall and a CDM-improved base. A two-dimensional finite-element model was calibrated against inclinometer measurements. Tests on 578 specimens from 65 field columns yielded a mean secant modulus E50 of 956.61 MPa and a coefficient of variation (COV) of 0.53. Lognormal stiffness fields were generated using spectral representation and assigned to the equivalent material representing the improved base. Wall properties and material strengths were held constant. The baseline analysis included 300 realizations. Six additional cases, each with 50 realizations, examined changes in COV and the horizontal and vertical scales of fluctuation. The baseline displacements formed two clusters around 8.5–8.6 mm and 9.5–9.6 mm. A two-component lognormal mixture was fitted to this distribution. Increasing COV from 0.1 to 0.3 increased the displacement standard deviation from 0.085 to 0.26 mm, with little change in the mean. Changes in the scales of fluctuation also affected dispersion. The probability of exceeding the measured displacement of 8.84 mm was approximately 44% in the baseline case and 42–52% in the parametric cases. These values represent the probability of exceeding a field-measured displacement, not the probability of structural failure. The results show that base-stiffness variability can affect displacement dispersion more than the mean response within the investigated ranges. Their interpretation remains subject to the equivalent-continuum assumptions and finite Monte Carlo sample sizes.
No takes yet. Share an insight, caveat, or question.
Le et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: