Answers are grounded in this paper and cite their sources.
To characterise the microstructural evolution during solidification of F45MnVS non‐quenched and tempered steel, a microstructure prediction model for continuous casting billets is developed using the cellular automaton–finite element (CAFE) method. The effects of key process parameters, including inclusion characteristics, superheat, casting speed and cooling water flow rate, are systematically investigated. Increasing the inclusion distribution growth factor from 0.8 to 1.2 reduces the columnar grain fraction and promotes equiaxed grain formation. As the number of effective inclusions increases from 0 to 80 000, the average grain size decreases significantly. Higher superheat reduces shell thickness, slightly coarsens grains and decreases the equiaxed grain ratio, with an optimal value of 20 °C. Increasing casting speed raises billet temperatures and reduces the equiaxed grain ratio, with an optimal value of 1.5 m/min. Higher cooling water flow increases shell thickness with limited influence on grain size; the optimal flow rate is 35 L/min. Industrial trials conducted under optimised conditions show good agreement between simulated and measured macrostructures, confirming the reliability of the model. The optimised parameters effectively promote equiaxed grain formation and microstructure refinement.
No takes yet. Share an insight, caveat, or question.
Qiu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: