Answers are grounded in this paper and cite their sources.
Flexible hydrogels endowed with highly tunable 3D network architectures and multiple dielectric loss mechanisms hold tremendous application potential in electromagnetic wave (EMW) protection for wearable devices and conformally curved surfaces. Compared with conventional mold-casting fabrication, photocuring-based 3D printing enables the precise construction of complex macroscopic hydrogel geometries, including periodic arrays, lattice configurations, and gradient structures, thereby facilitating the synergistic optimization of structural design and microwave absorption performance. Herein, a series of ion-enhanced hydrogels were fabricated via digital light processing (DLP) 3D printing. The incorporation of metal cations simultaneously enhanced the dielectric response and optimized impedance matching, while markedly improving the elastic modulus by 215.2% and the volumetric toughness by 305.5%. Among these, the glycerol-modified hydrogel achieved an effective absorption bandwidth (EAB) of 8.17 GHz at a thickness of only 2.39 mm, and at the same thickness, the pure hydrogel failed to achieve effective absorption across the entire frequency range. Furthermore, after meta-structure design, the CST simulation results show that the ion-enhanced hydrogel delivered dual intense absorption peaks of –27.68 and –26.37 dB, with the EAB broadened to 14.0 GHz, fully covering both X and Ku-bands. Overall, this work provides a novel design strategy for developing high-performance flexible microwave absorbers that simultaneously possess printability and broadband absorption capability.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: