Answers are grounded in this paper and cite their sources.
The fabrication of next‐generation energy‐storage devices requires electrode materials with high energy density, rapid charge–discharge characteristics, and long‐term cycling stability. In this work, we report, for the first time, novel ternary nanocomposite electrodes composed of functionalized multiwalled carbon nanotubes (f‐MWCNTs) or functionalized single‐walled carbon nanotubes (f‐SWCNTs), polyaniline (PANI), and tellurium (Te). The MWCNT/PANI/Te (FMPT) and SWCNT/PANI/Te (FSPT) composites were prepared through in situ polymerization. The strategic integration of Te, a highly electrically conductive element with high volumetric capacity and environmental stability, improves electron transport, provides additional pseudocapacitive redox sites, and alleviates volumetric strain in PANI during cycling. The resulting FMPT and FSPT electrodes exhibit lower bulk, charge‐transfer, and total resistances, thereby facilitating faster ion transport at the electrode–electrolyte interface, higher current flow, and improved capacitive performance. The FMPT electrode exhibited a superior specific capacitance of 1093 F g −1 at 10 mV s −1 and 1060 F g −1 from GCD measurements, together with a coulombic efficiency of 89% at 0.5 mA cm −2 . Among all the tested materials, FMPT showed the highest capacitance retention, approximately 93% after 5000 cycles, demonstrating a strong synergistic effect that provides structural support, electrical conductivity, and electrochemical reversibility. The electrode also exhibited the lowest R b , R ct , and R t values among all the fabricated cells, with approximately twice the energy density of the FMP electrode and 20% higher energy density than the FSPT electrode.
No takes yet. Share an insight, caveat, or question.
Kumari et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: