Answers are grounded in this paper and cite their sources.
Brushless DC (BLDC) motors are central to modern electric vehicle (EV) drivetrains, yet achieving high efficiency and stable torque under dynamic conditions remains a significant engineering challenge. This study presents the design and real-time embedded implementation of a motor control system realised on the STM32F103C8T6 microcontroller, together with a hardware-parameterised performance characterisation used to evaluate and cross-validate its behaviour. Two established control strategies—Trapezoidal Commutation and Field-Oriented Control (FOC)—were implemented independently on the same hardware platform under identical load conditions to enable a direct, unbiased comparison. The system incorporates Hall-effect sensor-based rotor position detection, closed-loop PI control (speed for Trapezoidal, d/q current for FOC), Direct Memory Access (DMA) for high-speed data acquisition, and a Controller Area Network (CAN) / Universal Asynchronous Receiver-Transmitter (UART) framework for real-time parameter transmission to a driver-facing display. Characterised performance results, derived from the implemented hardware's own rated parameters, show that FOC achieves a peak efficiency of 92% versus 86% under Trapezoidal Control, with torque ripple reduced by approximately 40% and peak current lowered from 50 to 44 A. The characterised thermal behaviour indicates that FOC maintains motor temperatures below 70 °C at full load, whereas Trapezoidal Control approaches critical thresholds under equivalent conditions. The modular architecture supports scalability across microcontroller tiers and EV configurations, providing a validated and deployable reference for energy-efficient BLDC drive systems.
No takes yet. Share an insight, caveat, or question.
Torad et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: