Answers are grounded in this paper and cite their sources.
Malachite green (MG) is a cationic dye that poses potential risks to aquatic organisms. This study evaluated the adsorption performance of silica xerogel derived from fly ash and modified with ethylenediamine (EDA) and copper ions (Cu²⁺) for MG removal and identified the most suitable adsorption isotherm model. Silica xerogel was synthesized using the sol–gel method, modified with EDA and Cu²⁺, and characterized using Fourier transform infrared (FTIR) spectroscopy. Batch adsorption experiments used 0.1 g of adsorbent and 25 mL of MG solution at initial concentrations of 100–1100 mg/L, pH 4, a stirring speed of 200 rpm, and a contact time of 90 min. Residual MG concentrations were measured using UV–visible spectrophotometry at 618 nm. FTIR spectra showed characteristic silica framework bands and spectral changes following contact with MG. Adsorption capacity increased from 22.562 mg/g at 100 mg/L to 187.416 mg/g at 900 mg/L, followed by slight decreases at 1000 and 1100 mg/L. The Langmuir model provided a better fit to the experimental data (R² = 0.98267) than the Freundlich model (R² = 0.79245), with a theoretical maximum adsorption capacity of 200.803 mg/g. These findings characterize the adsorption behavior of the modified xerogel and indicate its potential as an alternative adsorbent for removing MG from aqueous solutions under the tested conditions.
No takes yet. Share an insight, caveat, or question.
ratia et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: