Answers are grounded in this paper and cite their sources.
The performance of cementitious materials is fundamentally governed by the rate and extent of cementitious binder precipitation. Magnesium silicate hydrate (M-S-H) is a promising low-carbon cementitious binder, but quantitative descriptions of its precipitation kinetics remain limited. Here, M-S-H precipitation was investigated in a stirred batch reactor containing solutions of equimolar Mg and Si at 20, 50, and 75 °C. Inductively coupled plasma optical emission spectroscopy (ICP-OES) and energy-dispersive X-ray spectroscopy (EDS) indicate an initially Mg-rich precipitate whose Mg/Si ratio decreased with time toward ≈1.0–1.3. With the saturation ratio (Ω) calculated with respect to M1.0-S-H, treated as an ideal solid solution of the M0.75-S-H and M1.5-S-H end-members, and a common exponent fitted to all experiments simultaneously, temperature-dependent rate laws relating the precipitation rate (R, mM/s) to Ω were established:R20C°=10−9.05±0.19(Ω1.07±0.04−1),R50C°=10−7.89±0.15(Ω1.07±0.04−1),R75C°=10−7.38±0.14(Ω1.07±0.04−1). An Arrhenius regression of the rate constants of the individual experiments gave an apparent activation energy of 58 ± 8 kJ/mol. Rate constants were systematically lower at the lowest initial concentration (≈1 mM), indicating that factors other than the instantaneous Ω also influence the precipitation rate. These findings establish a quantitative kinetic framework for M-S-H precipitation, informing the design and optimization of magnesium-based cementitious binders.
No takes yet. Share an insight, caveat, or question.
MacAuley et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: