Answers are grounded in this paper and cite their sources.
Flat-rib-stiffened plates are widely used in steel bridges, and their ultimate compressive capacity is critical to structural safety. Local buckling under uniform axial compression is the dominant failure mode and is strongly affected by geometric imperfections and residual stresses. Shell finite element (FE) models capture these effects but are computationally demanding for wide box-girder flanges, whereas existing simplified methods have rarely been applied to bridge stiffened plates, and reported beam–column models either treat local buckling only implicitly through an effective width or consider only the global imperfection. To address this gap, this study develops a beam–column model that simultaneously accounts for geometric imperfections, residual stresses, and local plate buckling. Methodologically, the model integrates a plate material database of compressive stress–strain curves with a numerical integration scheme, implemented in an ANSYS–MATLAB program, and three shell FE models with different boundary conditions—orthotropic plate, (½ + ½)-bay, and simply supported—are developed and applied to 32 flat-bar-stiffened plates designed to Chinese specifications. The results show that the orthotropic plate model accurately reproduces multi-span plate behavior, that the two simplified models are accurate for rigidly stiffened plates, and that their applicability for flexibly stiffened plates requires a very small plate aspect ratio. The beam–column model agrees well with the simply supported shell FE model, with a mean ultimate strength ratio of 1.07 and a coefficient of variation of 0.08, providing a computationally efficient alternative for assessing rigidly stiffened flat-bar plates in steel bridges.
No takes yet. Share an insight, caveat, or question.
Lei et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: