Answers are grounded in this paper and cite their sources.
Purpose The pull-off test is widely used to evaluate coating strength, current studies and design codes rely heavily on adhesion strength measurements but fail to capture the holistic degradation behavior of coatings during aging. This study aims to address the limitations of conventional pull-off tests in assessing the precracking aging of steel structure coatings. Design/methodology/approach This study proposes a novel theoretical model to assess the aging performance of steel structure coatings under coupled static stress and thermal cycling prior to crack initiation. The model first integrates the thermodynamic principles and mechanical response underlying the pull-off test, incorporating key material parameters and aging indicators. Its validity is confirmed through combined experimental and theoretical analyses. In addition, this research refines the method for calculating cohesive energy during the precrack aging process by integrating experimental and theoretical analysis. Findings The results show that coating aging progresses from topcoat to primer, with cohesive failure in primer indicating the critical safe service state (CSSS). The cohesive energy attenuation rates under thermal cycling alone and combined with static stresses are 16.7%, 20.3%, 21.0% and 22.7%, respectively, consistent with thickness growth rates. The model successfully unifies thickness variation, adhesion loss and cohesive energy degradation, enabling quantitative prediction of the CSSS. Originality/value This investigation successfully addresses the limitations of using traditional pull-off test indicators alone for aging performance evaluation, providing a novel approach for quantitatively assessing the aging performance of steel structure coatings.
No takes yet. Share an insight, caveat, or question.
Qi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: