Answers are grounded in this paper and cite their sources.
High-entropy materials, which combine four or more principal elements in one phase, can hold high-atomic-number species for photon attenuation, strong neutron absorbers, and light or load-bearing elements in a single, chemically stable solid, which makes them candidates for multifunctional radiation shields. This review examines high-entropy alloys, carbides, and oxides as radiation-attenuating media, a role distinct from irradiation tolerance and not previously consolidated, and benchmarks them against lead and lead-free incumbents, separating computed from measured values. Between about 1 and 4 MeV, the mass attenuation coefficient varies little with composition, hydrogen apart, so density governs per-thickness performance and matching lead needs about 12 g cm−3; at 0.1–0.2 MeV diluted refractory chemistries need 18–22 g cm−3. The only fabricated tungsten-bearing alloy that states its density, Ta-Ti-V-W at 11.63 g cm−3, reaches 96% of lead’s linear attenuation at 1.25 MeV and 85% at 0.662 MeV, below tungsten, its heavy alloys, and tungsten carbide. High-entropy oxide fillers do not out-attenuate Bi2O3 per unit mass but combine photon attenuation with gadolinium capture in one phase. Of 39 studies, 21 measure attenuation, one measures lead in the same setup, and none measures charged-particle shielding. The review contributes a minimum reporting standard, a composition-level design framework, and a data-driven design workflow.
No takes yet. Share an insight, caveat, or question.
Asemi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: