Answers are grounded in this paper and cite their sources.
In the present investigation, a biochar-based adsorbent was prepared from pistachio shell waste-derived biochar (BPS). The obtained biochar was modified with Zeolite-13X particles to prepare a BPS/Zeolite-13X composite. The adsorbents were used to capture carbon dioxide from a gas stream. SEM-EDX, FTIR, BET, and XRD analyses were performed to characterize the obtained adsorbents. According to the results, the surface area of BPS and BPS/Zeolite- 13X was 184.74 and 357.05 m 2 /g, respectively. The increase in surface area after the modification suggested that the surface properties of BPS were improved by adding Zeolite- 13X particles. Under the selected experimental conditions (80% CO₂ and 60 min), the experimental equilibrium CO2 adsorption capacities (qe) of BPS and the BPS/Zeolite-13X composite were 0.869 and 1.237 mmol g⁻¹, respectively. The highest adsorption capacity of the BPS/Zeolite-13X composite was obtained at a BPS/Zeolite-13X mass ratio of 70:30. The Sips isotherm predicted maximum adsorption capacities (qm) of 1.04 and 1.54 mmol g⁻¹ for BPS and BPS/Zeolite-13X, respectively. The isotherm and kinetic models demonstrated that the adsorption of CO2 was best described by the Sips and pseudo-second-order models for BPS and BPS/Zeolite-13X adsorbents. The mechanism of CO2 adsorption was clarified on the example of the BPS/Zeolite-13X composite, which revealed the presence of van der Waals forces, electrostatic attraction, and possible hydrogen bonding. Therefore, the fabricated adsorbent showed promising performance for CO₂ capture, demonstrating the potential of pistachio shell waste-derived materials.
No takes yet. Share an insight, caveat, or question.
Azari et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: