Answers are grounded in this paper and cite their sources.
Purpose This study aims to eliminate part-supply errors, reduce non-value-added labour, and improve ergonomic conditions in high-mix single-axis linear actuator assembly using the DMAIC methodology. Methods A DMAIC-based case study was conducted in a Vietnamese precision-component manufacturing plant. Pareto analysis, process observation, 4M Ishikawa diagrams, on-site verification, and cause-prioritization matrices identified three root causes from seven candidates. Five improvement solutions were implemented, including single-order kitting, a two-level tray conveyor, centralized automatic ball feeding, point-of-use parts storage, and barcode-based poka-yoke verification. Results Missing and incorrect parts accounted for 76% of assembly part defects, with an initial supply-error rate of 0.31%. Supply errors decreased from 6.33 per month to zero during the post-improvement verification month (p ≈ 0.0018). Ball insertion time decreased by 1.13 minutes per cycle, while non-value-added labour was reduced by 3,203 hours annually. The improvements generated annual savings of US$7,110 from a US$5,200 investment, achieving an 8.8-month payback period and a first-year return on investment of approximately 37%. Value : This study demonstrates a cost-effective, human-centred DMAIC approach integrating error-proofing, material-flow redesign, and ergonomic improvements to enhance assembly quality, operational efficiency, and sustainable manufacturing practices.
No takes yet. Share an insight, caveat, or question.
Duc et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: