Answers are grounded in this paper and cite their sources.
A band‑pass filter composed of outer microstrip transmission lines, parallel‑coupled lines and central short‑ended parallel‑coupled lines is proposed and validated in this article. This symmetric topology consists of outer microstrip lines, bilateral parallel‑coupled‑line sections and a central short‑ended parallel‑coupled‑line branch. For the proposed structure, the ABCD matrix is employed to calculate the transmission zeros (TZs). Furthermore, the passband bandwidth can be controlled by adjusting the coupling coefficients appropriately. The center frequency of the designed single band‑pass filter for verification is located at 3.5 GHz, with a fractional bandwidth of 51%. The generation mechanism of TZs and the effect of coupling coefficients on filter performance are discussed in detail. Measured results are in reasonable agreement with simulated results, and the device exhibits good selectivity and out‑of‑band rejection, which verifies the feasibility of the presented design method.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: