Answers are grounded in this paper and cite their sources.
As the demand for sustainable pavement materials grows, this study evaluates hydrochar, a solid by-product of the hydrothermal co-liquefaction (co-HTL) of Arundo donax biomass and polyethylene terephthalate (PET), as an alternative filler in bitumen mastics. The effects of biomass-to-PET ratio, co-HTL temperature, and residence time on hydrochar characteristics and mastic chemo-mechanical performance are investigated. Results reveal that hydrochar improves high-temperature deformation resistance and elastic recovery, with the maximum recovery reaching 8.07 times that of mineral mastics. However, hydrochar mastics show inferior low-temperature relaxation and fatigue resistance, with fatigue life reduced by more than 50%, limiting their suitability for cold climates and heavily trafficked pavements. Increasing the biomass-to-PET ratio enhances high-temperature performance but reduces low-temperature flexibility and fatigue life, whereas higher co-HTL temperatures improve thermal cracking and fatigue resistance. The mastic containing 345–30–0.5B hydrochar exhibits the best fatigue and relaxation performance, while the 250–30–0.5B sample presents the highest rutting resistance. Hydrochar introduces more aromatic, polar, and oxygen-containing structures into the bitumen, strengthening hydrochar-bitumen interactions. Chemo-mechanical correlations further suggest that bitumen rich in aromatic rings, long-chain hydrocarbons, and carbonyl groups may improve the low-temperature relaxation and fatigue performance of hydrochar mastics.
No takes yet. Share an insight, caveat, or question.
Ren et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: