Answers are grounded in this paper and cite their sources.
Black phosphorus–carbon (BP–C) anodes offer substantial potential for high-capacity sodium-ion storage, yet their performance is governed by tightly coupled ionic transport, electronic connectivity, alloying-induced deformation, pore evolution, and mechanical degradation. A two-dimensional electro-chemo-mechanical framework is developed to establish quantitative relationships between electrode architecture, operating conditions, and the evolving stability of BP–C composites. The model integrates electrolyte transport, carbon-network percolation, particle-scale Na diffusion, sequential P→NaₓP→Na₃P transformation, finite chemical deformation, conservation-based porosity evolution, and damage-dependent conductivity loss. Validation against independent BP/CBP capacity and expansion data yielded a mean error of 5.94%, while experimental constraints on Na diffusivity, interfacial kinetics, mechanical modulus, and pressure-dependent porosity produced a mean deviation of 5.68%. The coupled analysis reveals a non-monotonic architecture–performance relationship: a balanced configuration with a carbon fraction of 0.50 and an initial porosity of 0.40 achieved a stability metric of approximately 0.56, whereas additional carbon did not provide continuous improvement. The predicted instability-transition rate reached approximately 2.8 C for 0.20 μm BP particles under 0.50 MPa confinement but decreased to about 1.5 C for 0.80 μm particles at 1.50 MPa. Moreover, the favorable carbon fraction shifted from approximately 0.30–0.42 at low rates to 0.47–0.60 under faster operation. The balanced architecture retained the highest stability ranking in seven of eight uncertainty perturbations, demonstrating that favorable electrode configurations emerge from the simultaneous balance of electronic percolation, ionic accessibility, Na redistribution, expansion accommodation, and stress localization rather than optimization of any single material parameter. These results establish an operating-dependent multidimensional design framework for mechanically resilient, transport-efficient phosphorus-based sodium-ion anodes.
No takes yet. Share an insight, caveat, or question.
Shelash et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: