Answers are grounded in this paper and cite their sources.
With the increase in operational speed and the complexity of line conditions, problems such as abnormal carbody vibration and bogie instability are becoming increasingly prominent. This paper examines the causes and suppression methods of a specific hunting phenomenon observed in high-speed trains during line tests, characterized by abnormal vibration on straight tracks but not on curved tracks. Through experimental data analysis, the vibration characteristics were identified, and a vehicle–track coupled dynamics model was established using measured wheel–rail profiles to reproduce and analyze the hunting mechanism. The results indicate that the dominant vibration frequency is approximately 9 Hz, and the primary cause of straight-line hunting is the increased equivalent conicity resulting from wheel–rail wear. The adoption of the Type C damping characteristic curve demonstrates a certain degree of effectiveness in mitigating such vibrations. To overcome the limitations of passive measures, an active anti-yaw damper control strategy based on a Gray Wolf Optimizer-optimized Fractional-Order PID (GWO-FOPID) controller is proposed. By incorporating a high-pass washout filter in the feedback path, the proposed controller suppresses the approximately 9 Hz carbody vibration on tangent track while limiting steady-state control action during curve negotiation. The results indicate that integrating a fixed-gain GWO-tuned FOPID active anti-yaw controller with washout filtering provides an operating-condition-aware strategy for controlling wear-induced hunting in high-speed trains.
No takes yet. Share an insight, caveat, or question.
Han et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: