Answers are grounded in this paper and cite their sources.
Bottom ash (BA) generated from the combustion of a specific biomass mixture consisting of Gliricidia sepium and Hevea spp. (Rubber wood) in a boiler was investigated for the removal of JAKOFIX RED ECON (JRE), a commercial azo reactive dye, from aqueous solutions. The effects of adsorbent dosage, shaking time, settling time, and pH of the initial solution on the adsorption efficiency were evaluated. Batch experiments were conducted using 100 ml of 20 ppm JRE solution, shaken at 150 rpm at 298 K. The optimum adsorbent dosage was 0.400 g, and the adsorption process was found to be most effective in acidic conditions (pH 2.5). Equilibrium was achieved after 35 minutes of shaking, and there was no effect on the settling time, indicating a rapid adsorption process. The findings demonstrate that bottom ash derived from biomass is an efficient and cost-effective adsorbent for the removal of JRE (azo reactive dye) from aqueous solutions under optimized conditions.
No takes yet. Share an insight, caveat, or question.
Wijekoon et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: