Answers are grounded in this paper and cite their sources.
Measurements of the pressure–volume–temperature–composition ( PvTx) properties were carried out with the isochoric method for the binary mixture of difluoromethane (R-32) and 2,3,3,3-tetrafluoropropene (R-1234yf) for five compositions, including 7 %, 20 %, 21.5 %, 43 %, and 50 % mass of R-32, respectively. For each mixture, measurements were performed at multiple isochores covering the vapor and liquid phases as well as the vapor–liquid coexistence region. In addition, measurements near and within the critical region were reported, where experimental data are particularly limited for this mixture. Five hundreds and seventy one PvTx data were measured in the temperatures between 300 K and 400 K and in the pressures up to 7 MPa. The expanded uncertainties of the temperature, pressure, density, and composition were 5 mK, 1 kPa, 0.15 %, and 0.0005 mass fraction, respectively. Using the presented data, the performance of the mixture model currently implemented in REFPROP 10.0 and the newly introduced mixture model was evaluated. In addition, comparisons were made with the data available in the literature. Results show that the present data agree better with the newly introduced model than with the model currently implemented in REFPROP 10.0.
No takes yet. Share an insight, caveat, or question.
Itaiwi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: