Answers are grounded in this paper and cite their sources.
A unified strain-gradient elasticity–plasticity framework is presented for the size-dependent elastic–plastic analysis of functionally graded (FG) thick-walled cylinders subjected to internal and external pressure. Strain-gradient elasticity is employed in the elastic region, whereas strain-gradient plasticity governs the plastic response, allowing both elastic and plastic size effects to be incorporated within a single semi-analytical formulation. Material properties, including Young’s modulus, yield stress, and hardening modulus, are assumed to vary radially according to power-law distributions. Analytical field expressions are derived for the elastic and plastic regions under axisymmetric plane-strain conditions. The elastic response is represented through a reduced-order tensorial stress-gradient correction motivated by the Ru–Aifantis framework, while the plastic response is formulated using the Aifantis strain-gradient plasticity model. The elastic–plastic interface is determined from stress continuity, the external boundary condition, and a gradient-enhanced yield criterion. Parametric studies are performed to investigate the effects of internal pressure, elastic length scale, plastic strain-gradient coefficient, structural size, and material gradation index. The results show that internal pressure enlarges the plastic zone, whereas increasing the plastic gradient coefficient suppresses plastic-zone growth due to gradient-induced hardening. Material gradation significantly influences stress redistribution and yielding behavior. In contrast, the elastic length scale has a relatively small effect on the interface location but becomes more important for micro-scale cylinders. The reduced-order elastic-gradient correction is independently verified against an analytical strain-gradient elasticity solution for a purely elastic cylinder, yielding relative L 2 differences of 2.80% and 2.78% for the radial and circumferential stresses, respectively. Comparisons with classical and SGP-only solutions quantify the distinct contributions of elastic and plastic gradient effects and identify the scale regime in which the elastic-gradient correction becomes measurable.
No takes yet. Share an insight, caveat, or question.
Shokrollahi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: