Answers are grounded in this paper and cite their sources.
The efficient recovery of iron from low-grade, high-alumina hematite–goethite ores is challenging because of their complex mineralogy and fine dissemination. This study investigates suspension reduction roasting followed by magnetic separation for a refractory ore from Shanxi, China. Under the preferred single-factor conditions identified within the tested ranges, magnetic separation yielded a concentrate with 56.67% Fe and an overall iron recovery of 87.83%. The key contribution is to show that selective conversion of iron minerals into magnetite can be achieved while maintaining distinct phase boundaries between Fe-rich and Al/Si-rich gangue, thereby limiting encapsulation of aluminosilicate minerals. Chemical phase analysis showed that the iron distribution in the magnetic fraction (magnetite plus pyrrhotite) increased from 0.08% in the raw ore to 92.07% after roasting. SEM–EDS showed that the newly formed Fe-rich phases remained spatially distinct from the gangue matrix. Mechanistically, thermodynamic analysis and phase characterization are consistent with a selective FeOOH → Fe2O3 → Fe3O4 pathway under the preferred conditions. Excessive reduction (overly high temperatures or reducing atmospheres) may have promoted FeO and fayalite formation and potentially degraded magnetic separation performance; however, these over-reduction products were not directly identified in this study.
No takes yet. Share an insight, caveat, or question.
Zou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: