Answers are grounded in this paper and cite their sources.
Low-density resorcinol−formaldehyde (RF)-based carbon aerogels are limited by weak interparticle connections, brittleness, and carbonization shrinkage. Here, a multiscale reinforcement strategy combined pre-oxidized polyacrylonitrile fiber felt (PANF) with chitosan (CTS)-mediated regulation of the RF matrix. CTS refined the aerogel particles, strengthened interparticle connections, and improved fiber/matrix bonding. Co-pyrolysis converted PANF into a continuous carbon−fiber network within the carbon aerogel matrix, while fiber reinforcement constrained in-plane carbonization shrinkage. At the optimized CTS content, composites measuring 200 × 200 × 16 mm exhibited a density of approximately 0.17 g/cm3, a compressive stress of 1.13 MPa at 10% strain, a flexural strength of 4.31 MPa, and a thermal conductivity of 0.065 W/(m·K) at 1100 °C in air. After 20 min of one-sided heating at a set temperature of 1500 °C, the 16 mm-thick composite reached a cold-side temperature of 460.9 °C. The composite retained its overall shape after the high-temperature test. These results link nanoscale network regulation and continuous fiber reinforcement to a favorable balance between mechanical load bearing and high-temperature thermal insulation at low density.
No takes yet. Share an insight, caveat, or question.
Long et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: